Print Page
Search Site
LYSAGHT® BONDEK®
BONDEK® is a formwork and reinforcement system for concrete constructions, suitable for domestic and major building projects. It is more economical than conventional formwork, fast to install, and allows easy fixing of ceilings and services. Structurally, BONDEK replaces usual bottom reinforcement.
Base materials and coating mass
Steel grade: G550
1.0 & 0.75 mm BMT: Z350
0.6 mm BMT : Z350
Lengths
Custom cut lengths from 1100 to 17,000 mm
Mass
BMT 1.0 mm: 13.79 kg/m2
BMT 0.75 mm: 10.50 kg/m2
BMT 0.6 mm: 8.52 kg/m2
Tolerances
Length: + 0 mm, - 10 mm
Finishes
Galvanised is standard. A pre-painted underside can be made to special order.
BONDEK Accessories
BonfillPolystyrene foam stops concrete and air entering ends of ribs. | |
| | BonwedgeLightweight bracket for rods to suspend ceilings or services (other than fire sprinkler systems). |
| | Ceiling suspension nutPressed metal threaded bracket to suspend ceilings or services.Thread: M6 Max. load: 270 kg |
|
| BonstripPlastic trim to cover gaps formed by ribs. Plasterboard can be screwed directly to Bonstrip. Used when underside of Bondek forms an exposed ceiling. |
| | Bon-nutHeavy duty square nut to suspend ceilings or services. Glued to a paper strip, insertion is easy. |
| | EdgeformA galvanised section that creates a permanent formwork at the slab edges - cut, mitred and screwed on site. |
