Product Description and Features
Mini-corrugated wall cladding suitable for use on interior and exterior applications. This subtle profile is a perfect complement to other LYSAGHT® roofing and walling claddings to provide a contrasting surface as an accent feature.
- Perfect for decorative walls and ceilings
- Suitable for flat and curved installations
- Corrugations can run vertically or horizontally
- Nominal cover width: 820mm (807mm in WA)
Sheets are supplied custom cut.
Length: +5mm, -5mm
Width: +2mm, -2mm
Next generation ZINCALUME® aluminium/zinc/ magnesium alloy coated steel complies with AS1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).
COLORBOND® steel is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa), or G300 (300MPa) depending on profile. Minimum coating mass is AM100 (100g/m2).
COLORBOND® Metallic steel is prepainted steel for superior aesthetic qualities displaying a metallic sheen.
COLORBOND® Ultra steel is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/ zinc alloy-coated steel complying with AS 1397:2011. Minimum coating mass is AM150 (150g/m2).
COLORBOND® Stainless steel is pre-painted steel and is used for severe and coastal environments. The painting complies with AS/NZS 2728:2013 and the steel base is a stainless steel complying with AISI/ASTM Type 430; UNS No. S43000.
|MINI ORB® may be spring curved down to 1500mm radius. It is suitable for pre-curving – the minimum radius of curve is 150mm, and the minimum straight length after a curve is 50mm. Some possible profiles are shown on the left.Pre-curving is subject to enquiry as lead time applies.|
Mass – COLORBOND® steel
BMT 0.42mm: 4.04kg/m2
BMT 0.48mm: 4.58kg/m2
LYSAGHT MINI ORB® is available in the standard range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT® Walling Solutions brochure.
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
LYSAGHT® Walling Solutions